"What bag hardware do I need for The Bag of the Month Club?" Find out here!

The designers have put together advance hardware lists and will release them a month in advance to make your shopping trips easier.
Although these are subject to change, the club will try to keep them as specified.

August

(10) x Medium Rivets: 3/8" Caps x 5/16" Post (9 mm x 8 mm) – IMPORTANT: These are not optional. You may have to adjust the size up or down, depending on the thickness of your material.
(1) x ¾” (18 mm) Strap Slider (A Wide Mouth Strap Slider is recommended for faux leather, vinyl or cork straps.)
(2) x ¾” (18 mm) D-Rings
(1) x Rectangular Turn Lock
[1-1/2" (38 mm) wide x 1" (25 mm) high] OR (1) x 18 mm Magnetic Snap (A differently shaped turn lock can be used if desired)
(2) x ¾” (18 mm) Swivel Snap Hooks
(4) x 1/2” (12 mm) or 9/16” (14 mm) Purse Feet
(2) x ¾” (18 mm) Strap Ends for the handle
Optional: (2) x ¾” (18 mm) Strap Ends (in addition to the ones above, for the shoulder strap)
(1) x 7" (18cm) Zipper for the internal hanging zipper pocket (#3 nylon all-purpose zipper, 1" wide, non-separating) - You can buy a longer zipper, or 7" (18cm) of #3 zipper by the yard if preferred because it will be trimmed down
Optional: (1) Metal Edge Trim: Style B - Medium Pointed OR (1) Metal Edge Trim: Style D - Curved

September

(2) - 1" (25mm) rectangle rings
(1) - 1" (25mm) strap slider (regular if using cotton. If using vinyl or cork, a wide mouth slider would be better)
(1) - zipper end

October

(4) x 12mm bag feet,
(2) x Slim ¾” (18mm) magnetic snaps,
(4) x 1" (25mm) rectangle rings,
(8) x Medium Rivets: 3/8" Caps x 5/16" Post (9 mm x 8 mm) – NOTE: These are not optional.